DuPont™ Tyvek® 400 Coverall – Model TY127SWH

Description

The DuPont™ Tyvek® 400 Coverall is designed to provide protective clothing coverage for industrial and workplace applications where suitable disposable protective apparel is required. Its comfort-fit design includes a respirator-fit hood, elastic wrists and ankles, and an elastic waist to support a practical fit during use.

The coverall features serged seams, a storm flap and a pin-lock slider zipper pull. Its white construction allows easy visual inspection for visible contamination. The product is available in sizes MD, LG, XL, 2X, 3X, 4X, 5X, 6X and 7X, with size selection based on the wearer’s chest and height measurements. It is supplied in cases of 25 units.

The technical data sheet lists typical fabric properties including a thickness of 5.9 mils, basis weight of 1.2 oz/yd², Mullen burst strength of 50 psi and hydrostatic head of 45 inches of water. These are laboratory fabric results, not a guarantee of complete-garment performance. The manufacturer warns that Tyvek® 400 should not be used where the garment becomes wet with liquid, where strong acids may degrade the seams, or near heat, flames, sparks or potentially explosive or flammable environments. Suitability must be assessed for the specific application.

Key Features

• DuPont™ Tyvek® 400 fabric

• White coverall with comfort-fit design

• Respirator-fit hood

• Elastic wrists and ankles

• Elastic waist

• Serged seams

• Storm flap

• Pin-lock slider zipper pull

• Available sizes: MD, LG, XL, 2X, 3X, 4X, 5X, 6X and 7X

• Supplied in cases of 25 units

• Fabric thickness: 5.9 mils

• Fabric basis weight: 1.2 oz/yd²

• Typical Mullen burst strength: 50 psi

• Typical hydrostatic head: 45 inches of water

• Wearing apparel flammability result: Class 1 under 16 CFR 1610

Applications

• Industrial maintenance and operations

• General workplace protective clothing applications

• Manufacturing and processing environments, subject to hazard assessment

• Work tasks requiring a hooded protective coverall

• Applications where disposable protective apparel is specified

Certifications & Standards

The technical data sheet lists the following test methods and results:

• ASTM D1777: Thickness — 5.9 mils

• ASTM D3776: Basis weight — 1.2 oz/yd²

• ASTM D774: Mullen burst strength — 50 psi

• ASTM D1683: Seam strength — greater than 19 lbf

• ASTM D5034: Grab breaking strength — 18 lbf/in (MD) and 22 lbf/in (CD)

• AATCC 127: Hydrostatic head — 45 inches of water

• EN 1149-1: Surface resistivity — less than \(2.5 \times 10^9\) ohms at 23°C / 25% RH

• 16 CFR 1610: Wearing apparel flammability — Class 1

Quantity / Pack Information

• Packaging: 25 coveralls per case

• Available sizes: MD, LG, XL, 2X, 3X, 4X, 5X, 6X and 7X

• Option codes: VP, 00, NF

• Full part number format: TY127SWHxx0025yy, where xx represents size and yy represents the option code.